Client - TP-Link TD-w8960n User Manual

TD-W8960N
 System Contact: The location of the person that is identified as the system contact.
 Trap Manager IP: Enter the IP address of the SNMP Manager，where the SNMP Agent
forwards trap notifications.
Select the desired values and click Save/Apply to configure the SNMP options.
4.9.4 TR-069 Client
Choose "Management""TR-069 Client", you can see the TR-069 client screen as shown below.
TR-069（WAN Management Protocol）allows a Auto-Configuration Server (ACS) to perform
auto-configuration, provision, collection, and diagnostics to this device.
 Inform: You can select the checkbox to disable or enable the function of TR-069 client.
 Inform Interval: Type the interval time of your router contact with the ACS.
 ACS URL: Please accept this information from your ISP. And through ACS
(Auto-Configuration Server) you can perform auto-configuration, provision, collection, and
diagnostics to this router.
 ACS User Name: Please accept this User Name information from your ISP.
 ACS Password: Please accept the Password information from your ISP.

Note:
If you want to log on the ACS, you must own the ACS User Name and ACS Password.
 WAN Interface used by TR-069 Client: Please select the WAN Interface from the drop-down
list to perform this function.
 Connection Request User Name: Type the Connection Request User Name, set it yourself.
 Connection Request Password: Type the Connection Request Password, set it yourself.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-105
80