TP-Link TD-w8960n User Manual page 100

TD-W8960N
Now, try to log on to the Web-based configuration page again after the above settings have been
configured. If you still cannot access the configuration page, please restore your modem router's
factory default settings and reconfigure your modem router following the instructions in
Installation Guide. Please feel free to contact our Technical Support if the problem still exists.
T4. What can I do if I cannot access the Internet?
1) Make sure the telephone and Ethernet cables are plugged in correctly.
2) Try to log into the web management page of the modem router using the default address at
http://tplinkmodem.net. If you can, try the following answers. If you cannot, change your
computer to obtain an IP address automatically from the modem router.
3) Consult your ISP and make sure all the VPI/VCI, WAN Link Type, account username and
password are correct. If they are not, please replace them with the correct settings and try
again.
4) Restore the modem router to its factory default settings and reconfigure the modem router by
following the instructions in
5) Please contact our Technical Support if the problem still exists.
300Mbps Wireless N ADSL2+ Modem Router User Guide
3.2 Quick Installation Guide.
92
3.2 Quick