TP-Link TD-w8960n User Manual page 69

TD-W8960N
circumstances, changes may benefit performance. Carefully consider and evaluate any changes
to these wireless settings.
1. WEP
WEP is a basic encryption method offering two levels of encryption, 64-bit and 128-bit encryption.
To configure the WEP encryption, there are two ways.
Keep the Network Authentication of Open (insecurity) and select Enabled from the WEP
•
Encryption drop-down list, as shown in Figure 4-72. Open (insecurity) with WEP encryption
disable allows any wireless station to associate with the access point.
Select Shared from the Network Authentication drop-down list, as shown in Figure 4-73.
•
Shared must enable WEP encryption. Network using Open or Shared authentication with
WEP encryption only allows stations using the same network key encryption to associate with
it. Follow the instructions below to configure the Shared Keys.
 Encryption strength: Select the appropriate level of encryption, 64-bit or 128-bit.
 Current Network Key: To indicate which WEP key to use, select a transmission key number.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-72
Figure 4-73
61