Table of Contents
Advertisement
MAINTENANCE
FAN MAINTENANCE
To Remove Fan:
1) Turn the unit off and allow it to cool to room temperature,
2) Unplug or disconnect power source to stove.
3) Open the bottom louver.
4) Remove the fan harness from the back clip.
5) Remove the 2 screws that secure the fan in place.
6) Pull out the fan thermodisc block.
Back Clip
Thermodisc
Block
24
Fan
Fan
Screws
7) Carefully slide the fan to the front, rotate it 45 degrees and slide it out
simultaneously with the fan thermodisc block.
Fan Ground
Cable
8) Disconnect all the connectors from the fan and resistor.
9) Remove the fan ground cable.
10) Pull out the fan tray.
11) Remove the 3 screws from the back of the fan tray to remove the
fan.
12) Reverse the above steps to install the new fan.
Fan
Connectors
Regency I35 Gas Inbuilt Fireplace
Advertisement
Table of Contents
