INSTALLATION
1) Unplug the power source.
2) Remove the glass door.
ON/OFF & Fan Switch Installation:
3) Remove the heat shield from the left side of the faceplate by undoing
the 2 screws. See diagram 1.
Diagram 1
4) Disconnect the wires connected to the On/Off and Fan switch. See
diagram 2.
ON/OFF
Orange Red White Black
Yellow
Diagram 2
5) Remove the 2 bolts and nuts from the On/Off & Fan switch. See
diagram 3.
14
PREMIUM FLUSH FRONT INSTALLATION
Left Side
Heat Shield
FAN
Diagram 3
6) Place the manual control switch into the opening on the left side of
the faceplate as shown in diagram 4.
Diagram 4
7) Secure the manual control switch in place using the 2 bolts and nuts
removed in step 5. See diagram 5.
Diagram 5
Regency I35 Gas Inbuilt Fireplace