Avaya 1120E User Manual page 218

• Select Flash Disk
• Select the file you wish to copy and then press Send.
• You are prompted to select the device you wish to send the selected
file.
• Select the IP Deskphone as the destination device.
• The file is validated based on the file extension and the passing of the
validation routines and a handler is called for the file. In this case, the
image file copies the images directory of the flash file system on the
IP Deskphone.
• A success message appears on the screen displaying that the file is
copied to the IP Deskphone successfully.
displays a sample success message.
Figure 21: Sample success message for File Manager
operation
Note: After a file is selected, there can be multiple reasons why the
handling cannot complete. This issue can be caused when the file
size exceeds allowed limits, when there is not enough space on disk,
when a file with the same name already exists, or when actions on
the selected file type arenot allowed (configuration flag).
Error conditions display a message on the screen, and any action that
takes some time to complete displays the In progress... message on the
screen as shown in
device. The contents of the device are displayed.
Figure 22 on page
Configuring custom settings
Figure 21 on page 217
218.
217