Using The Call Park Feature - Avaya 1120E User Manual

Using the Call Park feature

You can use the Call Park feature to temporarily park a call so that you or
another user can retrieve the parked call from another phone. Using Call
Park does not tie up a line, because the call is held on the IP Office call
server.
A timer determines how long a call can remain parked; this timer is
configured by your system administrator. If the timer expires before the
call is retrieved at another extension, the call is returned to your phone.
To park a call:
Feature
CPark
Yes
1. Press the Feature
2. Press the CPark
The screen displays the message Call
Park?
3. Press the Yes
The deskphone displays the following
prompt: PrkOn:>
4. Using the key pad, enter an ID for the
parked call. Enter an ID that is up to 9
digits in length. You will need to enter
this ID when you retrieve the call from
park.
Note: If there is not currently an active
called parked that uses the ID that you
have entered, the deskphone displays
Forbidden.
While on an active call
soft key.
soft key.
soft key.
183