Avaya 1120E User Manual page 104

Table 14: Third-party USB headset with HID support features
(Part 2 of 5) (Part 2 of 5)
Feature
LEDs
Attached Indicator
Back Light
Message Waiting
External Alerter
Incoming Call
Caller ID Information
Configuring the Avaya 1120E IP Deskphone
Both types of headsets have LEDs on
the base station for status indication.
These LEDs are controlled by the
headset base stations themselves
according to their internal state
machines. The IP Deskphone has no
direct control of these LEDs.
Both types of headsets can have
attached indications independent of the
IP Deskphone operations.
The GN Netcom (Jabra) 9350 headset
can take over 3 seconds to complete the
enumeration process after the headset
is attached to the IP Deskphone. During
enumeration, the LEDs at the bottom of
the base station flash. The enumeration
process is complete only when there is a
blink at the headset piece and the base
LEDs become solid.
Not applicable
Not applicable
Not applicable
When there is an incoming call, the
IP Deskphone sends an alerting event to
the headset. Each type of headset has
different incoming call indications.
Not applicable
Description
103