Avaya 1120E User Manual page 207

Configuring custom settings
• Disable—to the disable the screensaver.
• Enable (no password)—to enable the screensaver with a password
free mode.
• Enable (with
password mode.
The following are the options available for the screensaver settings menu:
• Select—to select the currently highlighted setting.
• Back—to dismiss the screensaver mode menu.
Note: Some options do not appear, depending on configuration.
Disabling the Screensaver displays a message confirming your selection.
Enabling the screensaver in
confirming your selection.
Note: If the device configuration does not allow the use of a
password free screensaver, this menu option is unavailable to you.
Enabling the screensaver in
enter the password before logging in.
The screen lets you launch the user-defined password definition screen if
it is enabled in the configuration.
The text on screen displays Enter user password to activate screensaver
followed by a user input prompt.
The options, which are available for the Enable (with password) mode are
as follows:
• Ok—Screensaver enabled message appears if the password is valid.
Invalid password message appears if the password is invalid.
• 123/abc—to toggle input mode between numeric or alphabet.
• Set—context-sensitive soft key appears only if the feature allows the
setting of user-defined passwords. This key invokes a password
definition screen that allows you to configure a password.
• Back—to dismiss the Enable (with password) mode menu.
206
password)—to enable the screensaver with a
no password
password protected
mode displays a message
mode prompts you to