Fisher & Paykel Active Smart User Manual page 17

Cleaning Care – Special Features
Humidity Control System
Important Note: When cleaning the shelf above
the vegetable bins, we recommend that you do
not disassemble the Humidity Control System
from the shelf.
In the event that the plastic lid and humidity slides
become separated from the glass shelf, follow these
instructions to reassemble.
Turn shelf upside down
1
To attach humidity slides onto shelf
2
front corners, fit bottom clips into shelf
front trim. Next, slide sideways towards
shelf until arm clips onto glass.
To attach humidity control lid – with
3
text facing you, align lid with front of
shelf. Hold lid vertically and fit front
end into retainer on shelf. Ensure lid
fits into retainer as well as underneath
humidity slides.
At the sides of the shelf, adjust
4
humidity slide tabs so that the plastic
lid is between the shelf and the tabs.
If clips on back of shelf are present,
5
fasten lid with rear clips. Ensure that
the cover is fully secure at front and
back of shelf.
Retainer
Humidity Slides
EN
17