Fujitsu primergy TX150 User Manual page 41

■ Inserting the CD-ROM
1
Make sure the server is turned on and press the CD-ROM eject button.
The CD-ROM tray comes out a little.
CD-ROM eject button
2
Place the CD-ROM (label side up) onto the tray.
3
Press the CD-ROM eject button.
The tray is inserted into the server and CD-ROM is set.
When CD-ROM is set, the CD-ROM access LED is lit. To do next operation, confirm that the
LED is off .
■ Ejecting the CD-ROM
To eject the CD-ROM, confirm that the CD-ROM access LED is off and then press the CD-ROM eject
button.
CD-ROM tray
PRIMERGY TX150 S4 User's Guide
1
41