Fujitsu primergy TX150 User Manual page 270

Chapter 9 Operation and Maintenance
■ SNMP Service Startup Fails
If the Simple Network Management Protocol (SNMP) is installed, but has not started, perform the
following procedure to start the service.
●
For Windows server 2003
1
Click [Start] → [Computer Management] in this order.
2
Select [Services] from the [Services and Applications] menu.
3
From the details, select [SNMP Service].
4
Select [Start] from the [Action] menu.
●
For Windows 2000 Server
1
Right-click the [My Computer] icon on the desktop and click [Manage] from the
displayed menu.
2
Select [Services] from the [Services and Applications] menu.
3
From the details, select [SNMP Service].
4
Select [Start] from the [Action] menu.
■ Time Display in Linux OS Environment
●
Difference in Time between the OS and the Hardware Clock
During OS operation in a Linux environment, the software clock on the OS, rather than the hardware
clock in the server, is used to display the time.
This may cause a difference in time between the OS and the hardware clock.
When you want to see the accurate time on the OS, it is recommended to use the NTP service to
periodically correct the time displayed on the OS.
270
To have the service automatically start each time the OS starts, double-click [SNMP Service]
from the details, and select [Automatic] for the [Startup type] setting of the [SNMP Service
Properties] window.