Fujitsu primergy TX150 User Manual page 298

C Remote Control Function
4
The remote control window appears.
******************************************
Welcome to System TX150 S4
BMC FW: 0x.xx
State: On (na = Currently not available)
******************************************
REMOTE MAINTENANCE MENU
(1) Immediate Power Down
(2) Immediate Reset
(3) Graceful Power Down
(4) Power Cycle
(6) View System Eventlog (SEL)
Enter selection or (0) to quit:
Power state is displayed next to "state:".
Display
On
Off
5
Select a menu and press the corresponding number key.
"na" is displayed in the bracket of unavailable menu.
Immediate Power Down
Immediate Reset
Graceful Power Down
Power Cycle
Power On
View System Eventlog(SEL)
-
6
If pressing the [1], [2], [3] or [4] key, perform the following operation.
When "Do you really want to do this? [y/n]" appears, press the [y] key and the [Enter] key.
For [3] or [4], the pop-up window "System shutdown due to <software command> in 60 seconds!
Press Cancel to abort!" appears when Windows is operating. Select [OK].
298
SDRR: xx.xx
na Power On
table: Meaning of [state]
The server is powered on.
The server is powered off.
table: Remote Control Menu
Menu name Key
[1]
[2]
[3]
[4]
[5]
[6]
[0]
Description
Operation
Turns the server off.
Resets the server.
Shuts down the OS and turns the server off. When
Windows is operating, the server is turned off after the OS
is shut down.
Turns the server off and back on again. When Windows is
operating, the server restarts after the OS is shut down.
Turns the server on.
Refers to the system event log of the server.
Exits the remote controller.