12
Remove the driver disk and restart the system.
When a LAN card is added, the following window may appear at system startup after addition
of a LAN card. Perform the appropriate procedure according to the displayed window.
•When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and
subsequent steps in "Updating LAN Drivers"
•When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or
Insert the driver disk created from the ServerStart CD-ROM and install the driver.
After LAN driver installation, names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-1852
PG-1892
PG-2861
4.3.4 Latest Drivers
For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
®
floppy disk" or "Intel
PRO/1000 Disk Driver"
table: LAN device name
LAN cards
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 MT Desktop Adapter
Intel(R) PRO/1000 MT Server Adapter
Intel(R) PRO1000 PT Dual Port Server Adapter
PRIMERGY TX150 S4 User's Guide
LAN device name
4
139