Latest Drivers - Fujitsu Primergy RX100 S3 User Manual

Chapter 4 Manual OS Installation
12
Remove the driver disk and restart the system.
After LAN driver installation, names of the LAN devices are displayed as follows.
LAN cards
Onboard LAN (1000BASE-T)
PG-1852
PG-1862
PG-1882L
PG-1892L

4.3.4 Latest Drivers

For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
132
When a LAN card is added, the following window may appear at system startup after addition
of a LAN card. Perform the appropriate procedure according to the displayed window.
•When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and
subsequent steps in "Updating LAN Drivers".
•When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or
®
floppy disk" or "Intel PRO/1000 Disk Driver"
Insert the driver disk created from the ServerStart CD-ROM and install the driver.
table: LAN device name
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 MT Desktop Adapter
Intel(R) PRO/1000 MT Dual Port Server Adapter
Intel(R) PRO/1000 MF Server Adapter
Intel(R) PRO/1000 MT Server Adapter
LAN device name