JUKI cp-180 Instruction Manual And Parts List page 43

Example) Settng of the thread trmmng functon to the nput opton port.
The lamps will light up alternately.
The lamps will light up alternately.
) Select functon number 2 accordng to the functon
settng method.
2) Select the tem of " " by swtch 3 .
3) Select 90 port by swtch 2 .
4) Select " " thread trmmng functon by swtch 3 .
5) Fx " " thread trmmng functon by swtch 2 .
6) Set actvaton of sgnal by swtch 3 . If the thread
trmmng s performed by "Low" sgnal, set the ds-
play to " ", and f the thread trmmng s performed
by "Hgh" sgnal, set the dsplay to " ".
7) The above function is fixed by switch 2 .
8) The opton nput s ended by swtch 2 .
9) Select the tem of "
the functon settng mode.
- 7 -
" by swtch 3 , and return to