Non Combustible Facing Board; Non Combustible Facing Installation - Regency GEM54-NG Owners & Installation Manual

If finishing the wall above the unit with paint -
the non-combustible board (shipped separately
from the unit) should be installed. Facing board
must be ordered when ordering the unit.
Calcium silicate board is a high - grade material
with cement, quartz, natural and selected
minerals as the main raw materials. It is widely
used for partitions and ceilings in buildings.
It is fire proof and earthquake proof.
If finishing the wall above the unit with materials
such as tile, brick, marble, etc. non-combustible
board available from the building supply store
can be used.
Note: Calcium Silicate is 12mm thick.
Caution: This non-combustible board can be damaged if
dropped or struck. Handle with care.
Inspect board prior to installation. Do not install if cracked.
1) Using plaster board screws - secure non combustible material
around unit, framing and top nailing strip every 150mm.
Important Note: To avoid cracking the board - pre-drill holes prior to
securing to unit/ framing.
2) Wipe any debris/dust from the non combustible
material and drywall.
3) Prior to taping and mudding it is highly recommended
to prime the facing and edges using a quality primer. This will
ensure proper adhesion of both the tape and mud.
The optional board is very porous. During dry fit, ensue that both
surfaces being taped are even.
4) Tape the seams using a mesh type tape.
5) To seal up seams as normal we recommend using a
product called Durabond high strength compound - for the first coat
This product can be found at any hardware store.
Sealant must be cured as per manufacturer's recommendations.
6) Prime wall for a second time for proper adhesion of paint
7) Paint walls using a high quality paint which will withstand
the high temperatures being emitted from this appliance.
Note: Incorrectly sealed joints may crack. Keep sealant thickness to a
minimum.
Regency Gemfire™ Gas Fireplace

NON COMBUSTIBLE FACING BOARD

NON COMBUSTIBLE FACING INSTALLATION

Timber Stud
Non-combustible
Facing Board
5-5/8
Non-combustible Facing Board
(143mm)
4"
(102mm)
Non- combustible board
(calcium silicate)
INSTALLATION
Metal Stud (header)
61-1/2" (1537mm)
52-5/8 (1343mm)
61-1/2" (1537mm)
Non- combustible board
(calcium silicate)
Non-combustible board
MUST BE PRIMED.
Timber Stud
9