Genie S-40 Maintenance Manual page 60

Maintenance Manual
Quarterly Maintenance Procedures
Kubota WG-972:
Low rpm idle adjustment:
1 Loosen the core clamp screw so the cable
moves freely.
2 Hold the throttle lever against the low idle
adjustment screw.
3 Turn the adjustment screw clockwise to
increase low rpm or counterclockwise to
decrease low rpm.
4 While holding the throttle lever against the low
idle adjustment screw, tighten the core clamp
screw.
High rpm idle adjustment:
1 Loosen the lock nut on the high idle
adjustment nut.
2 Turn the high idle adjustment nut clockwise to
increase the high rpm or counterclockwise to
decrease high rpm.
48
3 Tighten the lock nut.
1 core clamp screw
2 throttle lever
3 low idle adjustment screw
4 lock nut
5 high idle adjustment nut
6 high idle solenoid
S Booms • Z Booms
April 2016
Part No. 1268489