Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 78

4
Troubleshooting
68 Phaser 840 Color Printer
3.
To clean the rubber exit rollers:
a.
Wrap an alcohol-soaked wipe around the index finger of one hand.
b.
Press your wipe-covered finger against each roller.
c.
Use the thumbwheel to turn the rollers. Rotate the rollers four or five
complete revolutions for each roller segment to ensure proper cleaning.
N
O T E
You may notice some staining of the exit rollers while performing the cleaning
procedure; this is normal and does not indicate additional cleaning is necessary.
Simply clean rollers to remove any build-up of ink.
4.
To clean the two sets of ribbed exit guides under the exit cover, gently wipe
the raised ribs using an alcohol-soaked wipe.
4
C
A U T I O N
To avoid damaging the print drum and exit guide, never scrape excess ink with a
tool or fingernail; use only the materials provided with the cleaning kit.
5.
Close the exit cover.
9103-15
9103-17