Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 107

Windows NT
1.
From the printer's CD-ROM, run setup.exe. Select Custom Install. Select
Printer Utilities.
2.
Select the utility file you want to send to the printer, for example RESET.PS.
3. In the taskbar on your screen, click Start.
4. In the menu that appears, select Programs.
5. Select MS-DOS Prompt.
Change directory to the PHSRTOOL directory.
If your printer is connected to a network, type the following command:
lpr -S <IP Address> -P PS RESET.PS
If your printer is connected to an optional Novell NetWare or TCP/IP
network, follow the instructions provided with your network software.
Advanced Features and Troubleshooting Manual
7
Using Printer Utilities
97