Using Slip Sheets - Tektronix PHASER 840 Advanced Features And Troubleshooting Manual

Using Slip Sheets

You can have the printer insert a slip sheet, or divider page, to separate print jobs,
multiple copies of a single print job, or individual pages of a print job.
There are two selections to make in your printer driver.
1.
In a supported driver, locate the Slip Sheet options:
LaserWriter 8.3.4 driver:
In the Print dialog box, click Options.
LaserWriter 8.5.1 driver:
In the Print dialog box, use the Printer-Specific Options pull-down
menu.
Windows 95 / Windows 98 PostScript driver:
In the Device Options tab, select Printer Features.
Windows NT driver:
From the Properties tab, select the Advanced tab. From the Document
Options tab, select Printer Features
Adobe PS3 driver for Windows 3.1:
Select the Features tab options.
2.
Select one of the following for Slip Sheet:
Off
End of Job
End of Set
End of Page
3.
Select one of the following for Slip Sheet Source:
Upper Tray
Middle Tray
Lower Tray
Turns off the slip sheet feature.
Inserts a slip sheet between individual print jobs.
Inserts a slip sheet between copies, or sets, of a multi-copy
print job.
Inserts a slip sheet between every page of a print job.
Takes paper for the slip sheet from the upper media tray.
Takes paper for the slip sheet from the middle media tray, if
you have two High-Capacity Paper Tray Assemblies
installed.
Takes paper for the slip sheet from the lower media tray, if
you have one or two High-Capacity Paper Tray Assemblies
installed.
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
33