Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 32

2
Advanced Print Features
22 Phaser 840 Color Printer
Labels
C
A U T I O N
To avoid media jams and damage to the printer components, make sure that you
follow these guidelines.
Tektronix recommends using Avery™ White Laser Labels, for example:
A/Letter: 5160, 5960
A4: L7162
Each label is at least 25 x 67 mm or 1 x 2.625 in. in size. Smaller labels may
peel off and damage printer components.
If any of the labels on a sheet are missing, do not use that sheet; it may
damage the printer.
Use full-sheet peel-off labels.
Make sure that the duplex printing option is disabled in the printer driver.
Do not store labels in high-humidity environments. Labels stored under
such conditions will jam in the printer.
1.
Refer to your application's manual for information on page orientation and
page margins.
If your application has a setting for Avery™ labels, use it as a template.
Otherwise, set margins and spacing according to the guidelines in the
instruction sheets that are included with the labels.
2.
In a supported printer driver, select Manual Feed Paper. Make sure that
the duplex printing option is disabled.
3.
To send the job to the printer, click Print.
4.
Open the printer's manual feed cover and adjust the guide for your paper
size.
5.
When the printer's front panel reads Waiting for paper, use both
hands to insert one sheet of media until it stops:
Insert the label sheet with the side to be printed face-down.
6.
Wait for the front panel's prompt before inserting additional sheets.
9103-36