Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 81

7.
To clean the bottom of the media-pick roller:
a.
Use a prepackaged alcohol-soaked cloth.
b.
Reach into the media tray slot to access the pick roller.
Scrub the bottom surface of the pick roller thoroughly.
8.
Replace the upper media tray in the printer.
Cleaning the separator pad
1.
Remove the upper media tray from the printer.
2.
Gently wipe the separator pad using an alcohol-soaked cloth.
3.
Inspect the separator pad for damage to the metal edge; it should be free of
dents and lie flat against the rubber surface. If any damage is seen, the
separator pad should be replaced.
4.
Replace the upper media tray in the printer.
Advanced Features and Troubleshooting Manual
4
Troubleshooting
9103-21
9103-63
71