Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 37

The printer accepts these (and other) downloadable fonts:
Type 1
Type 3
Adobe
Agfa
Bitstream
Microsoft
Apple
TrueType (scalable to any point size; look the same on-screen and printed).
Before printing, make sure that the fonts specified in your document are installed in
the printer or are set up correctly. If you request a font in an application that is not
resident in the printer, or is not correctly installed, the text is printed in Courier
typeface.
Refer to "Connecting Scanners and Hard Drives" on page 101 for more information
on connecting hard drives for font storage.
Downloading fonts from a Macintosh
1.
From the printer's CD-ROM, run the Installer application. Select Custom
Install. Select Printer Utilities.
2.
From the PhaserTools folder on your computer's hard disk, double-click
Apple Printer Utility. Select your printer's zone (AppleTalk Zones) and
your printer (Printers).
3.
Click Open Printer; a dialog box appears.
4.
Click the arrow next to Printer Preferences.
5.
Click the arrow next to Fonts for a list of installed fonts and locations.
6.
Click Add.
7.
Select your font folder, then select the font you want to download.
8.
Under Destination, select the download location: either the printer's
memory or an attached hard disk.
9.
Click Add for one font or click Add All for all fonts in the folder.
10.
Click Send; the font(s) appear in the list.
N
O T E
To remove downloaded fonts, click Remove.
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
27