[Original Settings] ([Annotation]) ([Save]) - Konica Minolta bizhub c654 User Manual

15

[Original Settings] ([Annotation]) ([Save])

To display: [Box] - [System] - [Annotation] - Select a User Box to save the file - [Save] - [Application] - [Orig-
inal Settings]
Set the options to scan originals correctly based on their properties.
Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Direction]
15-132
Description
Set the options to scan originals correctly based on their properties.
• [Mixed Original]: Even for an original with pages of different sizes, by
using ADF, you can scan data while detecting the size for each page.
If the originals have the same width, select [Same Width]. If the originals
have different widths, select [Different Width].
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught.
• [Z-Folded Original]: Even folded originals, the size of the original can be
detected accurately.
• [Long Original]: Select this option when loading a long original that is
larger in the feeding direction than the full standard size (11 e 17 or A3).
Scan an original using the ADF while removing dust from the Slit Scan
Glass.
It takes longer to finish scanning of originals, compared to the normal op-
eration.
Blank pages contained in the original loaded on ADF are skipped when the
original is scanned.
Select this check box when scanning an original containing blank pages.
Blank pages detected are not counted as original pages.
When scanning a 2-sided original, select the original binding position to
avoid the binding positions be reversed between the front and rear faces.
• [Auto]: The binding position is automatically set. When the long side of
the original is 11-11/16 inches (297 mm) or less, the binding position is
set to the long side of the paper. When the long side of the original ex-
ceeds 11-11/16 inches (297 mm), the binding position is set to the short
side of the paper.
• [Left Bind]: Select this option when the binding position is set to the left
of the original.
• [Top Bind]: Select this option when the binding position is set to the top
of the original.
Specify the orientation of the loaded original.
bizhub C754/C654