Konica Minolta bizhub c654 User Manual page 233

Settings
[Offset]
[Staple]
[Punch]
[Fold/Bind]
Tips
- The optional Finisher is required to use the Staple function.
- To use the punch function, install the Punch Kit PK-521 or Z Folding Unit in the optional Finisher
FS-535, or install Punch Kit PK-520 in the Finisher FS-534.
- The optional Finisher and Saddle Stitcher are required to use the Fold/Bind function.
- The optional Finisher and Saddle Stitcher are required to use the Tri-Fold function.
- To use the Z-fold function, the optional Finisher FS-535 and Z Folding Unit are required.
bizhub C754/C654
Description
Select this item when sorting by copies or by page to feed out paper.
If the finisher is installed, the printed sheets are fed out and stacked on top
of each other with each copy or page set staggered to separate them.
If no finisher is installed, the printed sheets are fed out and sorted by cop-
ies or page in an alternating crisscross pattern when the following condi-
tions are satisfied.
• 8-1/2 e 11, A4, or B5 paper is used.
• Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray
• Auto Paper for the paper size setting is set.
Select the binding positions for stapling the sheets.
• [Corner]: Each set of printed sheets is stapled in a corner (top left or top
right) before it is output.
• [2 Position]: Each set of printed sheets is stapled at two positions (in the
top, left, or right) before it is output.
• [Position Setting]: Select the binding position. If [Auto] is specified for
the binding position, the binding position is determined automatically
based on the direction of print file.
Select binding positions when punching sheets.
• The number of punched holes varies depending on the country you are
in.
• [Position Setting]: Select a position to punch. If the punch position is
set to [Auto], the position to punch is determined automatically based
on the direction of print file.
Select how to fold or bind paper.
• [Half-Fold]: Feeds out a printed sheet by folding it in two.
• [Center Staple & Fold]: Staples and feeds out a printed sheet by folding
it in two.
• [Tri-Fold]: Feeds out a printed sheet by folding it in three. Also select
the unit by which the paper is folded from [By Copy Job (Multiple)], [1
Unit], and [By Page]. When you set [By Page], specify the number of
pages to be folded at one time.
• [Z-Fold]: Z-folds the long side of a printed sheet before feeding it out.
This option is available when printing paper of 11 e 17 w, 8-1/2 e 14 w,
A3 w, B4 w, or 8K w. Selecting 8-1/2 e 14 w folds paper in two instead
of Z-folding.
15
15-23