Procedure 7.14 - Replacing A Handlebar - Precor C354 Service Manual

•
C534, C534i Self Powered Elliptical Fitness Crosstrainerl
Procedure 7.14 - Replacing a Handlebar
1. Remove the three screws that fasten the handlebar to the upper pivot arm.
Diagram 7.11 - Handlebar Mounting
Upper Pivot ~---,--'-
Handlebar
------t.
Lower Bolt
---ir.o~---~
1 - - - - -
Mounting Bolt
•
2. Remove the three bolts that fastens the handlebar to the upper pivot arm and remove the
handlebar.
3. Set the replacement handlebar at its mounting position and hand start the three handlebar
mounting bolts removed in step 2. Torque the bolts to 156 inch pounds.
4. Replace the bolt that fastens the handlebar to the lower pivot arm and torque the bolt to 156
inch pounds.
Page 51