Table of Contents
Advertisement
•
•
•
C534, C534i Self Powered Elliptical Fitness Crosstrainer
6.
Remove the mounting bolt and nut that fastens the stairarm pivot block to the stairarm. (See
Diagram 7.12).
7.
Slide the stairarm off of the stairarm pivot block.
8.
Set the stairarm pedal at it's mounting position on the replacement stairarm.
9.
Install and hand tighten the stairarm pedal mounting hardware removed in step 2. Torque
the stairarm pedal mounting bolts to 60 in/lbs.
10. Remove and replace the wheel per procedure 7.10
11. Slide the replacement stairarm assembly onto the stairarm pivot block. Install and hand
tighten the stairarm pivot block mounting hardware. Torque the stairarm pivot block
mounting hardware to 15 ft.llbs.
12. Set the replacement stairarm connector at it's mounting position and slide the secondary
link onto the stairarm connector. Replace, but do not tighten the hardware removed in step
3. Torque the two bottom bolts to 50 in.llbs. Torque the horizontal bolt to 11 fUbs.
13. Replace the left and/or right cover sections per Procedure 7.20.
Page 48
Advertisement
Table of Contents
