Table of Contents
Advertisement
C534, C534i Self Powered Elliptical Fitness Crosstrainer
•
Procedure 7.15 - Replacing a Stairarm Connector (C534, only)
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in
Section One, Things You Should Know.
1.
Remove the three bolts that fasten the stairarm connector to the stairarm. See Diagram
7.12.
2.
Remove the retaining ring that fastens the lower pivot arm to the stairarm connector.
•
•
Diagram 7.12 - Pivot Arm Connector
3.
Remove the stairarm connector. Remove the wave washer from the pivot arm connector.
4.
Place the wave washer from step 3 on the replacement stairarm connector. Slide the
stairarm connector into the lower pivot arm and replace the retaining ring.
5.
Hand start the three bolts that fasten the stairarm connector to the stairarm. Torque the
three stairarm connector bolts to 125 inch pounds.
Page 52
Advertisement
Table of Contents
