Table of Contents
Advertisement
C534, C534i Self Powered Elliptical Fitness Crosstrainer
•
Procedure 7.8 - Replacing the Input Pulley Assembly
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in
Section One, Things You Should Know.
1.
Remove the rear cover and disconnect the red battery lead from terminal M6 of the lower
PCA.
2.
Remove the stairarm assemblies as described in Procedure 7.12, steps 2 to 4.
3.
Remove the crankarm assemblies as described in Procedure 7.5, steps 2 to 5.
4.
Remove the input pulley assembly mounting nuts (2 per pillow block bearing).
5.
Remove tension from the input pulley belt as described in step 6:
Diagram 7.6 -Input Pulley Assembly
6.
Straighten the locking tabs and turn the left and right tension bolts counterclockwise until
tension is removed from the both belts. (See Diagram 5.3)
•
Input Pulley
Belt
Pillow Block
Bearing
Input Pulley
Mounting Nut
•
Page 42
Advertisement
Table of Contents
