Procedure 7.16 - Replacing A Handlebar - Precor C576i Service Manual

Procedure 7.16 - Replacing a Handlebar

1. Remove the plastic cap from the inside lower end of the handlebar. Refer to Diagram 7.17.
Remove the bolt that fastens the handlebar to the stairarm connector. There are two
washers and a steel spacer in the stairarm connector.
Diagram 7.17 - Lower Handlebar Mounting
Handlebar
Mounting
Bolt
2. Remove the stairarm connector from the handlebar.
3. Remove the bolts that fasten the center of the handlebar to the handlebar pivot. Refer to
Diagram 7.12.
Diagram 7.18 - Center Handlebar Mounting
Handlebar
Pivot
C576i Self Powered Elliptical Fitness Crosstrainer
Stairarm
Connector
Plastic
Cap
Mounting
Bolts
Page 62