Easydial Directory Dialing - Muratec MFX-1300/1700 Operating Instructions Manual

Advanced features

EasyDial directory dialing

EasyDial directory dialing makes your autodialer even more like an electronic phone
book. EasyDial sorts and displays numbers alphabetically according to their Location
s, so you can find them and dial them easily.
ID
To dial using EasyDial:
1 For a regular phone call: Pick up the optional handset.
Note: To make a regular phone call from your machine, you must have an
optional handset attached.
For a fax call: Place the document in
tion and contrast if necessary.
2 Press /
SPEED DIAL TEL INDEX
machine s EasyDial directory:
Telephone Index
ABC Company
The EasyDial directory sorts entries alphabetically in the following order:
( 1 ) by alphabet, ( 2 ) by number and ( 3 ) by symbol.
If the listing that appears is the one you want to dial, skip to step 4.
Otherwise, proceed to next step.
3 Scroll through the listings to find the one you want. You do this by pressing the
following cursor key:
o r to select the character set alphabet, number or symbol for the
f i r s t character of the Location
o r to check different listings within that character set.
Note: The scrolling is open-ended. For example, when you run out of
listings beginning with alphabet
moves you into listings beginning with other characters.
4 When the displays the name you want to dial, press
LCD
If you ve set the document in the
sion.
If you ve set the document on the
pressing
D O C U M E N T SIZE
transmission.
If you make a regular phone call, speak after a person answered.
3.8
, or on the glass. And adjust resolu-
ADF FBS
twice. The shows the f i r s t l i s t i n g in your fax
LCD
[A]
:[01]
.
ID
, pressing o r automatically
A
.
STA R T
, your machine will start the fax transmis-
ADF
glass, enter you document size by
FBS
,then press . Your machine will start the fax
STA R T
If an EasyDial call fails
If an EasyDial call fails, what happens next depends upon the kind of call it was.
If it was a fax call
Your fax machine automatically redials the number according to the redial interval
you ve set. It keeps trying until either of the following occurs:
It successfully reaches the other number
It has attempted the number of redials programmed and has still not connected (see
Changing redial settings, page 4.5).
If it was a regular phone call
You ll have to redial manually:
1 L i fting the optional handset.
2 Press / . The will show:
REDIAL PA U S E LCD
View Redial History
0:1234567890
Note: To use / key, you should assign it to a Soft key in advance.
REDIAL PA U S E
(See page 3.16.)
3 Your machine can remember the last 10 dial numbers you ve dialed.
Press o r until the dial number you want to redial appears.
4 Press .
STA R T