Muratec MFX-1300/1700 Operating Instructions Manual page 107

Advanced features
4 Depending on if you have already entered at least one number into the blocked
numbers list, the shows one of the following:
LCD
Enter Fax Number
01:_
5 If you want to modify an existing entry in the blocked numbers list, press
until you see the number you want to modify.
or
If you want to enter a new number in an already-started blocked numbers list,
press o r until you find an empty position in the list.
Then press to enter or modify the blocked number.
ENTER
Note: To clear a number from the list, see Clearing a number from the blocked
numbers list, right column.
6 Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber o f 972-555-3038, you should enter 5 , 5 , 5 ,
ID
8 :
Enter Fax Number
01:555-3038_
To change a specific digit, press
sor is under the digit, then use the numeric keypad to enter the correct number.
7 Press to save the setting. The
ENTER
numbers list.
I f y o u do not want to enter or change a number for this slot, go on to step 8.
I f y o u do want to enter or change a number for this slot, repeat steps 5 7.
8 Press .Your machine will return to standby mode.
STO P
3.54
Select BlockJunk No.
o r
01:555-2971
, 3 , 0 , 3 ,
DIALING OPTIONS
to move left o r to move right until the cur-
shows the next slot in the blocked
LCD
Clearing a number from the blocked numbers list
To clear a number from the list:
1 Press Program key,
If your Block Junk Fax setting is either Mode2 o r Mode3, skip to step 3.
Block Junk Fax:Off
o r
2 Press o r until you see your preference, Mode2 o r Mode3.
Block Junk Fax:Mode2
3 Press .The
ENTER
Select BlockJunk No.
01:555-2971
4 Press o r until you see the number you want to clear.
5 Press to clear the number.
CANCEL
To clear another number from the blocked numbers list, repeat steps 4 5.
Otherwise, go on to step 6.
6 Press to return your machine to standby mode.
STO P
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the blocked
numbers.
To print a list of the blocked numbers, press Program key,
, 2 , 1 , 0, .
B ENTER
/ /Enter
/ /Enter
shows:
LCD
, 1 , 1 , 0 ,
E
.
ENTER