Using Your Fax Machine As A Phone; Dialing A Telephone Number; On-Hook Dialing; Redial - Muratec MFX-1300/1700 Operating Instructions Manual

Using your fax machine as a phone

Your fax machine can also be used as a phone, if you have an optional handset
i n s ta l l e d . The following is a brief look at the machine s telephone features.

Dialing a telephone number

1 Pick up the optional handset. You will hear a dial tone.
2 Dial the number by the using numeric keypad.
o r
Press the one-touch key. (See One-touch phone dialing, on page 3.4.)
o r
Press / once, then press the three digit speed-dial number.
SPEED DIAL TEL INDEX
(See Phoning via speed-dial, on page 3.6.)
o r
Press / twice, then search the name you want to call using the
SPEED DIAL TEL INDEX
cursor key. (See Easy dial directory dialing, page 3.8.)
3 When the other person answers, begin speaking.

On-hook dialing

Because your machine has a monitor speaker, you can dial without picking up the
optional handset.
Note: If you want to use /
MONITO R CALL
advance. (See page 3.16.)
For hands-free dialing:
1 Press / .You ll hear a dial tone (unless you have set your speaker
MONITO R CALL
volume to O f f ; see page 1.8), and the
** Tel Mode **
_
2 Dial the number you want. Use either the numeric keypad, a one-touch key, a
speed-dial number or telephone index to dial.
key, you should assign it to a Soft k e y i n
shows:
LCD
Important: Your machine s monitor speaker is not a speaker phone. If a person
answers the call, pick up the handset to speak.
Note: I f t h e c a l l f a i l s , p r e s s
MONITO R

Redial

Note: To use / key, you should assign it to a Soft key in advance. (See
REDIAL PA U S E
page 3.16.)
1 L i ft the optional handset to get a dial tone.
2 Press / . The will show:
REDIAL PA U S E LCD
View Redial History
0:1234567890
3 Your machine can remember the latest 10 dial numbers. Press
dial number you want to redial appears.
4 Press .
STA R T
When the other person answers, use the optional handset to speak to that per-
son.

Changing the dialing type

If, with your machine set for pulse dialing, you must enter tones (
press once (the ! symbol will be shown on the
DIALING OPTIONS
now will tone dial all subsequent numbers.
Note: To use key, you should assign it to a Soft key in advance. (See
DIALING OPTIONS
page 3.16.)
Note: Using this key enables tone transmission from the numeric keypad aft e r t h e c a l l
is connected. When you hang up the call, your machine will return to pulse
dialing for the next call.
/ to hang up.
CALL
o r
) during a call,
DTMF
) . Your machine
LCD
Basic operation
u n t i l t h e
2.19