Special Features; Soft Keys - Muratec MFX-1300/1700 Operating Instructions Manual

Advanced features

Special features

Your fax machine has numerous special features to make your communication easier.
W e ll cover them here.

Soft Keys

Soft Keys are shortcut keys. You can program the soft keys on the control panel to turn
on or off any function with just the touch of a button. Your machine has three Soft Keys.
If the light above any one of these keys glows, that means the setting
programmed into that key is active.
These keys are programmed at the factory to turn the following functions on or off :
Soft Key 1:Energy saving (see page 4.10)
Note: If the optional printer controller has been installed to your machine,
this key will be
Soft Key 2:Sort copy (see pages 2.13 and 4.7)
Soft Key 3:Combine (see page 2.17)
Note: If your machine is MFX-1300, this key is Fax&Copy.
But instead of using the Soft Keys to control the functions above, you can program them
to turn other functions on or off . These functions are:
Redial / Pause (see pages 2.2 and 2.6 2.7)
Dialing options (see page 3.1)
Confirmation report (see page 3.21)*
Memory transmission (see page 2.3)*
Monitor / Call request (see pages 2.6 and 3.24)
Fax & Copy (Default for MFX-1300) (see page 3.20)*
TTI transmission (see page 4.2)*
Security reception (see pages 3.49 3.50)
Cover page (see page 3.22)*
Negative / Positive copy (see page 2.17)
Copy / Fax mode (see page 1.11 )
* When you change the setting by using the Soft Key, it will be available only for the
next transmission. Once that transmission is complete, your machine returns to its
default setting. If you want to change the default setting, see Changing the default
settings on page 4.1 4.11 .
3.16
key.
ONLINE
Setting the Soft Key
1 Press Program key, , 1 , 0 , 3 ,
B
Select Soft Key No.
1:Energy Saving
. . . or indicates another function you ve stored into this key.
2 Press o r until the Soft Key (1-3) you want to change appears. In this exam-
ple, we ve chosen 3.
3 Press . The shows:
ENTER LCD
3:Combine
/ /Enter
4 Press o r until the function appears that you want to program into the key. I n
this example, we ve chosen Cover page.
3:Cover Page
/ /Enter
5 Press to save the setting.
ENTER
The will display the next Soft Key.
LCD
If you do want to set this Soft Key, go back step 3.
If you do not want to set the currently displayed Soft Key but do want to set
another Soft Key, go back to step 2.
If you do not want to set any more Soft Keys, press
Now you can use the labels included in your machine s original packaging to label the
Soft Key function you just set.
.The shows:
ENTER LCD
t o f i n i s h .
STO P