Table of Contents
Advertisement
Programmable one-touch keys
Using the power of programmable one-touch keys
In order to complete some operations on your machine, you may have to follow several
steps and press several different buttons. But programming your machine s one-touch
keys ( P1 and P2) can reduce those many steps to a simple press of a key.
You can teach the one-touch keys to carry out any of the following operations:
Communications functions:
Delayed transmission (explained on pages 3.10)
Broadcasting (page 3.9)
Regular polling (pages 3.14 3.15)
Batch transmission (pages 3.11 3.13)
F-Code transmission (page 3.33)
F-Code polling (page 3.34)
To teach these keys, you tell the machine four simple things:
H o w
The key you re programming
W h o
The number(s) the machine should dial
What
The operation it should perform
When
The date(s) and time(s) when you want it to perform the operation
Printouts:
Machine settings list (page 4.11 )
Fax settings list (page 4.11 )
Copy settings list (page 4.11 )
Activity journal (page 3.21)
Delayed commands list (page 2.8)
One-touch list (page 3.3)
Speed-dial list (page 3.5)
Programmable one-touch numbers list (page 3.48)
Call group directory (page 3.7)
Blocked numbers list (page 3.54)
Sample cover page (page 3.22)
Department time list (page 3.56)
List of F-Code boxes (page 3.29)
List of documents stored in F-Code boxes (page 3.29)
Batch box list (page 3.12)
List of stored batch documents ( page 3.12)
Macros list (page 3.19)
Document storage:
Regular polling documents ( page 3.14)
F-Code polling documents ( page 3.29)
Programming a delayed transmission
To program a delayed transmission into a programmable one-touch key:
1
Press Program key,
, 3 , 0 , 1 ,
A
ble one-touch number available:
Select Program No.
P2:No Number Stored
Note: I f P2 appears on the
LCD
b e r f o r P1. You can see what you programmed into P1 by pressing
you want. For example, if you set P1 for storing of the polling document,
you will see:
Select Program No.
P1:Polling Document
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If you re changing a previously stored command: If your previous com-
mand for this key was a for a delayed operation, and you want to keep
this key programmed for a delayed operation, use these instructions to
make changes. But if you want to assign this key to a completely different
operation for batch transmission, then you must first erase the stored
command before programming the new one.
3
If you want to select a different programmable one-touch key than what appears
on the
, press that key now.
LCD
Advanced features
.The
shows the first empty programma-
ENTER
LCD
, it means that you have already entered a num-
, i f
3.35
Advertisement
Chapters
Table of Contents
