Installing The Replacement Fan Tray - Extreme Networks BlackDiamond 8800 Hardware Install Manual

3 Use the fan tray handle to pull the fan tray half-way out from the fan tray slot. This action
disconnects the fan tray from the switch power.
Warning
Be sure that all fan blade motion has ceased before continuing to remove the fan tray.
4 Support the bottom of the fan tray with your free hand as you use the handle to slide the fan tray
completely out from the fan tray slot.
Caution
Be sure to support the weight of the fan tray with both hands as you remove it from the
chassis.

Installing the Replacement Fan Tray

To install a replacement fan tray into the BlackDiamond 8800 Series switch:
1 Support the bottom of the fan tray with one hand as you lift the fan tray by the handle using the
other hand.
2 Align the spare fan tray with the fan tray slot on the switch, and then slide the fan tray into place in
the switch (see
8806 Switch on page 128).
Caution
Always use both hands to support the weight of the fan tray during installation.
BlackDiamond 8800 Hardware Install Guide
Replacing BlackDiamond 8800 Series Chassis Components
the following figure and Figure 106: Installing the Fan Tray in the BlackDiamond
127