Removing The Blackdiamond 8806 Ac Power Cord Retainer - Extreme Networks BlackDiamond 8800 Hardware Install Manual

Figure 88: Securing the BlackDiamond 8806 AC Power Cord Retainer
1 = Retaining screw
4 Starting from the left, lay the first four power cords into the retainer
Figure 89: Routing the Power Cords in the Retainer
5 Lay the last two power cords on top of the bottom four cords

Removing the BlackDiamond 8806 AC Power Cord Retainer

To remove the BlackDiamond 8806 AC power cord retainer:
1 Use a #2 Phillips screwdriver to loosen the captive screw located on each end of the AC power cord
retainer.
BlackDiamond 8800 Hardware Install Guide
BlackDiamond AC Power Cord Retainers
(see the following
(see the previous figure).
figure).
113