Calling Line Identification Restriction +Clir; Calling Line Identification Presentation +Clip - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Calling Line Identification Restriction +CLIR

Description:
This command controls the Calling Line Identification restriction supplementary service.
Values: <n> Sets the line ID restriction for outgoing calls
<m> Shows the subscriber CLIR status in the network
Syntax: Command syntax: AT+CLIR=<n>
Response syntax: +CLIR:<n>,<m>
Command
AT+CLIR=2
AT+CLIR ?
Note: Ask for current functionality

Calling Line Identification Presentation +CLIP

Description:
This command controls the calling line identification presentation supplementary service. When
presentation of the CLI (Calling Line Identification) is enabled (and calling subscriber allows), +CLIP
response is returned after every RING (or +CRING) result code.
Values: <n> Parameter sets/shows the result code presentation in the TA
<m> parameter shows the subscriber CLIP service status in the network
Syntax: Command syntax: AT+CLIP=<n>
Response syntax: +CLIP: <n>,<m> (as response to AT+CLIP)
Command
AT+CLIP=1
Note: Enable CLIP
AT+CLIP?
Note: Ask for current functionality
AT+CLIP=0
Note: Disable CLIP presentation
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
0 Presentation indicator is used according to the subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
0
CLIR not provisioned
1
CLIR provisioned in permanent mode
2
Unknown (no network...)
3
CLIR temporary mode presentation restricted
4
CLIR temporary mode presentation allowed
0
Disable
1
Enable
0
CLIP not provisioned
1
CLIP provisioned
2
Unknown (no network...)
+CLIP: <number>, <type>[ ,<subaddr>, <satype>, <alpha> ] (for an incoming call,
after each RING or +CRING indication)
Chapter 10 – Supplementary Services Commands
(for AT+CLIR ?)
Possible responses
OK
Note: Command valid
+CLIR:<n>,<m>
OK
Note: <n> and <m> as defined above
Possible responses
OK
Note: CLIP is enabled
+CLIP:<n>,<m>
OK
Note: <n> and <m> defined as below
RING
Note: Incoming call
+CLIP: "0146290800",129,1,,,"FRED"
Note: Incoming call with number and name presentation
RING
Note: Incoming call
+CLIP: "0146290800",129,1,, "8000204212FFFF"
Note: Incoming call with number and name presentation
(UCS2 format)
OK
Note: Command valid
83