32Khz Power Down Mode +W32K; Change Default Melody +Wcdm - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Wireless gsm/gprs modems at commands reference guide
Table of Contents

Advertisement

32kHz Power Down Mode +W32K

Description:
This command allows the 32kHz power down mode to be enabled or disabled:
Values:
<mode>
Syntax:
Command syntax: AT+W32K=<mode>
Command
AT+W32K=1
Note: Enable 32kHz power down mode
AT+W32K=0
Note: Disable 32kHz power down mode

Change Default Melody +WCDM

Description:
This command allows a the selection of a manufacturer-specific melody. This default melody will be
played for any new incoming voice call, either on the buzzer or on the speaker.
Values:
<melody>
<player>
Syntax:
Command syntax: AT+WCDM=<melody>,<player>
Command
AT+WCDM=0
Note: Select no melody
AT+WCDM=5
Note: Select melody n°5
AT+WCDM?
Note: Indicate the current melody
AT+WCDM=,1
Note: Select the speaker to play the
melody on.
AT+WCDM?
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
When power down mode is entered, the product uses a 32kHz internal clock during inactivity
stages (regardless of its nominal internal clock).
When enabled, power down mode is active after 1 to 15 minutes. The mode is not stored in
EEPROM: the command has to be repeated after a reset.
For additional information on power down mode, see Specification of Power Down Control via
RS232 in the Appendix.
0 Disable 32kHz powerdown mode
1 Enable 32kHz powerdown mode
0
No melody (default)
1...10
Melody 1 to 10
0
Melody n°<melody> will be played on the buzzer for any new incoming voice call. Default.
1
Melody n°<melody> will be played on the speaker for any new incoming voice call.
Chapter 13 – Specific AT Commands
Possible responses
OK
Note: 32kHz power down mode is enabled
OK
Note: 32kHz power down mode is disabled
Possible responses
OK
OK
+WCDM: 5,0
OK
Note: Melody n°5 is currently selected, and the buzzer is
selected to play it.
RING
Note: An incoming call occurs, and the melody n°5 is played
on the buzzer.
OK
+WCDM: 5,1
OK
Note: Now the speaker is selected to play the melody if an
incoming call occurs.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents