Settings Of A Phonebook Group +Wpgs - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Settings of a Phonebook Group +WPGS

Description:
This commands sets the parameters of a phonebook group.
Values: <mode>
<index>
<restrict call>
Syntax: Command Syntax: AT+WPGS=<mode>,<index>[,<restrict call>]
Command
AT+WPGS=1,1,1
Note: Set restrict call to "All Accepted"
AT+WPGS=0,1
Note: Read group 1 settings
AT+WPGS=?
Note: Test command
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
0
Read group settings
1
Write group settings
Index of the group
Parameter is optional if <mode.=0. It is mandatory if <mode>=1.
0
All refused. Incoming call is forwarded to the voice mailbox
1
All accepted. Incoming call is received (RING message is displayed)
Chapter 8 – Phonebook Commands
Possible responses
OK
+WPGS: 1,
OK
Note: Group1: all accepted
+WPGS: (0-1),(1-10),(0-1)
OK
59