Dte-Dce Character Framing +Icf - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

DTE-DCE Character Framing +ICF

Description:
This command determines the local serial port start-stop (asynchronous) character framing that the
DCE uses.
Values: <format>
<parity>
Note:
7E1, 7S1 and 7N2) are supported on autobauding operation.
Syntax: Command syntax: AT+ICF= <format>[, <parity>]
Command
AT+ICF?
AT+ICF=?
AT+ICF=2,0
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
0
Autodetect (not supported)
1
8 Data 2 Stop (supported)
<parity> parameter is ignored
2
8 Data 1 Parity 1 Stop (supported)
If no <parity> provided, 3 is used by default as <parity> value
3
8 Data 1 Stop (supported)
<parity> parameter is ignored
4
7 Data 2 Stop (supported)
<parity> parameter is ignored
5
7 Data 1 Parity 1 Stop (supported)
If no <parity> provided, 3 is used by default as <parity> value
6
7 Data 1 Stop (supported)
<parity> parameter is ignored
0
Odd
1
Even
2
Mark
3
Space
4
None
All character framing formats settings of the serial interface (i.e., 801, 8E1, 8S1, 8N1, 7N1, 7O1,
Possible responses
+ICF: 3,4
OK
Note: Current values
+ICF: (1-6),(0-4)
OK
Note: Possible values
OK
Note: New values
Chapter 12 – V.24 and V.25 Commands
(supported)
(supported)
(supported)
(supported)
(supported)
100