Dce Response Format V; Default Configuration Z; Save Configuration &W - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

DCE Response Format V

Description:
This command determines the DCE response format, with or without header characters <CR><LF>.
Result codes are provided as numeric or verbose.
Values:
Information
responses
Result codes
Syntax: Command syntax: ATV<n>
Command
ATV0
Note: DCE transmits limited headers and trailers and
numeric result codes
ATV1
Note: DCE transmits full headers and trailers and
verbose response text

Default Configuration Z

Description:
This command restores the configuration profile. Any call is released.
Values:
No parameters
Syntax: Command syntax: ATZ
Command
ATZ
Save Configuration &W
Description:
This command writes the active configuration to a non-volatile memory (EEPROM). For description of
the stored parameters, refer to Appendix A.
Values:
No parameters
Syntax: Command syntax: AT&W
Command
AT&W
Note: Writes current configuration to EEPROM
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
<n>=0
<text><CR><LF>
<numeric code><CR>
Possible responses
OK
Note: Command valid
Chapter 12 – V.24 and V.25 Commands
<n>=1
<CR><LF>
<text><CR><LF>
<CR><LF>
<verbose code><CR><LF>
Possible responses
0
Note: Command is valid (0 means OK)
OK
Note: Command valid
Possible responses
OK
Note: Command valid
103