Message Service Failure Result Code +Cms Error; Specific Error Result Codes - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Message Service Failure Result Code +CMS ERROR

<er> is defined as below:
<er> Meaning
1 to 127 Error cause values from the GSM
recommendation 04.11 Annex E-2
301 SMS service of ME reserved
302 Operation not allowed
303 Operation not supported
304 Invalid PDU mode parameter
305 Invalid text mode parameter
310 SIM not inserted
311 SIM PIN required
312 PH-SIM PIN required
313 SIM failure
316 SIM PUK required
317 SIM PIN2 required
318 SIM PUK2 required
321 Invalid memory index
322 SIM memory full
330 SC address unknown
340 no +CNMA acknowledgement expected

Specific Error Result Codes

<error> Meaning
500 unknown error.
512 MM establishment failure (for SMS).
513 Lower layer failure (for SMS)
514 CP error (for SMS).
515 Please wait, init or command processing in progress.
517 SIM Toolkit facility not supported.
518 SIM Toolkit indication not received.
519 Reset product to activate or change a new echo cancellation
algo.
520 Automatic abort about get plmn list for an incoming call.
526 PIN deactivation forbidden with this SIM card.
527 Please wait, RR or MM is busy. Retry your selection later.
528 Location update failure. Emergency calls only.
529 PLMN selection failure. Emergency calls only.
531 SMS not sent: the <da> is not in FDN phonebook, and FDN lock
is enabled. (for SMS)
532 Embedded application is activated so objects flash are not erased +WOPEN
533 Missing or Unknown APN
536 Class locked: A command has been launched from a port. The
effect is to lock all commands belonging to the same class. If
another port launches a command of this class, this error will
occur as long as the class is not released (at first command's
completion time).
537 Phonebook group full.
538 Not enough space to copy SMS
539 Invalid SMS
541
Open AT® application and AT software version do not match
543 CMUX connection is refused by remote, after a restart of CMUX
protocol by the modem, due to a 27.010 connection loss during
virtual channels establishment.
continued on next page
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
Appendix A – Result Codes, Failure Causes, Other Tables
Resulting from the following commands
+CMGS, +CMSS
+CSMS (with +CMS: ERROR 301)
All SMS commands (+CMSS, +CMGL, +CPMS, +CSMP...
All SMS commands
+CMGS, +CMGW
+CMGS, +CMGW, +CMSS
All SMS commands
All SMS commands
All SMS commands
All SMS commands
All SMS commands
All SMS commands
All SMS commands
+CMGR, +CMSS, +CMGD
+CMGW
+CSCA?, +CMSS, +CMGS
+CNMA
Results from the following commands
All commands
+CMGS, +CMSS (+CMS ERROR: 512)
+CMGS, +CMSS (+CMS ERROR: 513)
+CMGS, +CMSS (+CMS ERROR: 514)
All commands ( "+CME ERROR: 515" or
"+CMS ERROR: 515") except ATHO,
ATH1, AT+WOIR, AT+WIOW,
AT+CFUN=1, AT+CLCC, AT+WAC,
AT+CPAS, AT+VGR, AT+VTS,
AT+SPEAKER
+STGI
+STGI
+ECHO, +VIP
+COPS=?
+CLCK
+COPS
+COPS
+COPS
+CMGS, +CMSS (+CMS ERROR: 531)
ATD*99 +GACT +CGDATA
All commands
+CPBW
+WMCP
+CMGR
+WOPEN
+CMUX
174