GRAUPNER POLARON EX-1400 Operating Instructions Manual page 50

Bat. Temp Too High
Battery temp is too high
to be operated!
Internal Temp.
Internal temp is too high!
Contact Service
if this message
appears often.
Balancer Port
BLC Port is opened!
Pls check the BLC port.
BLC Volt High
Balancer cell voltage is
too high!
Over cell is [0]
BLC Volt too low
Balancer cell voltage is
too low !
Low cell is [0]
Motor Current
Pls reconnect the motor
and restart!
50
◄ The battery temperature is higher than the set maximum tem-
perature.
◄ The charger is overheated! Wait until it cools again! If the
error message is displayed permanently, please contact the
service.
◄ No balancer connected.
◄ The balancer has stated (cell number in parentheses) too high
cell voltage.
◄ The balancer has stated (cell number in parentheses) too low
cell voltage.
◄ The current of the connected motor is too high. Please check
your parameters.