GRAUPNER POLARON EX-1400 Operating Instructions Manual page 32

Increase or decrease now by using the INC / DEC buttons to select the current
CYCLE 09:03:26
C-D PM
value, such as 1.80 A. If necessary, you can also specify a value that strongly
13 LiPo 03s 2200
deviate from the current value by touching one of the six option buttons.
00:02:23
CC/CV
Tapping the
73
0.0°C mAh
memory.
11.681 1.80
V A
11.97Vin [01] 33.3mΩ
Current Set
1.0A 3.0A
5.0A 10.0A
15.0A 20.0A
CH1 STOP STOP CH2
If it is touched the STOP button at the bottom of the display during the actual
CYCLE 09:03:38
C-D PM
charge or discharge process, it appears the display on the left.
13 LiPo 03s 2200
Tapping „Yes" will cancel the further running in the background.
CC/CV 00:02:35
Tapping „No", the window hides again, and takes the operation run unaffected-
75
0.0°C mAh
ly.
11.684 1.80
V A
11.97Vin 33.3mΩ
[01]
Do you want to stop
the operation?
ESC STOP
CH1 STOP STOP CH2
After proper completion of the process the charger emits audible signals and
CYCLE 10:31:09
C-D PM
the display shows corresponding informations.
13 LiPo 03s 2200
So Tap the window and afterwards, if necessary, the STOP or ESC key to
01:30:06
END
reverse to basic display.
2173
0.0°C mAh
Operation Finished
11.678 2.20
V A
END : NORMAL
11.97Vi 33.3mΩ
The operation is finished.
Pls touch this window
and then the window will
disappear.
CH1 STOP STOP CH2
32
fi eld closes the window and takes the selected value into the