GRAUPNER POLARON EX-1400 Operating Instructions Manual page 49

Connection
Selected cells and
cells connected to the
balancing port are
different!
Pls check and restart!
Low Output-Volt
Output voltage is higher
than the selected cells
or voltage.
Pls select proper cells
or voltage!
High Output-Volt
Output voltage is higher
than the selected cells
or voltage.
Pls select proper cells
or voltage!
No Sensor
Temp-sensor is not
connected to the port.
Pls connect temp sensor
to the port then restart!
Temp. Sensor
A temperature sensor is
connected in reverse or
is defective!
Bat. Temp Too Low
Battery temp is too low
to be operated!
◄ The cell count does not match the number of cells identified
at the balancer port.
◄ The selected output voltage is lower than the voltage of the
connected battery, or the number of cells is not correctly se-
lected.
◄ The selected output voltage is higher than the voltage of the
connected battery or the number of cells is not correctly se-
lected.
◄ No temperature sensor is connected. Please connect the sen-
sor and then restart the process!
◄ The temperature sensor is plugged in reversed polarity or it is
defective.
◄ The battery temperature is too low for charge or discharge
the battery.
INNOVATION & TECHNOLOGIE
49