GRAUPNER POLARON EX-1400 Operating Instructions Manual page 36

After the activation of the cycle number by tapping with a finger or with the pen
DATA 05:17:28
PM
laced in the side of the charger...
CYCLE DATA
Cycle No. 01
Charge Discharge
00 :00:0 0 00:00:00
0.000Vp 0.000Va
0mAh 0mAh
0.0mΩ 0.0mΩ
CH1 CH2
... It is possible to scroll through the data of other cycles with the INC or DEC
D ATA 05:17:28
PM
key.
CYCLE DATA
Cycle No. 03
Charge Discharge
00 :00:0 0 00:00:00
0.000Vp 0.000Va
0mAh 0mAh
0.0mΩ 0.0mΩ
CH1 CH2
Tapping again the cycle number deactivated the selection field.
Pressing again the DEC button (down arrow) at the bottom of the display brings from the second
screen of the "DATA" menu to the third:
In this third display of "DATA" menu are shown graphically the charge/dischar-
DATA 05:17:57
PM
ge data.
00:00:00 00.000V 00000mAh
0. 000V c 0.000Vr 0.0mΩ
AU TO V AT
GR= X
CH1 CH2
1 Graphical representation
DATA 05:17:57
PM
2 Vc = Voltage center (the center line voltage value actually assigned)
3 Vr = Voltage range (vertical range of the voltage display)
1
4 After tapping between "AUTO" and "MANUAL" switchable. In "manual"
2
5 After tapping selectable axis value:
00:00:00 00.000V 00000mAh
0. 000V c 2 0.000Vr 0.0mΩ 3
6 Factor of the horizontal time axis (AT (automatic) / 1 ... 43)
AU TO 4 5 V AT 6
GR= X
CH1 CH2
36
mode are "3" and "4" also manually settable.
GR(aphic)=V(olt), A(mpere) T(emperature)