Removing The Card; Preparing A Microsd Card For Use - Tascam DR-05 Owner's Manual

3–Preparation

Removing the card

1 Open the microSD slot cover on the right
side panel.
2 Press the microSD card in gently and then
release it to allow it to come out.
CAUTION
• Do not remove the microSD card from the unit when it is
connected to a computer by USB.
• microSD cards that meet microSD or microSDHC
standards can be used with this unit.
• A list of microSD cards that have been confirmed to
work with this unit can be found on our website (http://
tascam.com).
40
TASCAM DR-05

Preparing a microSD card for use

In order to use a microSD card in this unit, you
must format it first.
1 Confirm that a microSD card is installed
and turn the power ON.
2 The following message appears when a
new card or a card formatted for use with
another device is installed in the unit.
3 Press the Á button to start formatting.
4 When formatting ends, the Home Screen
opens.
You can also reformat the card in this unit
at any time. (See "System Settings and
Formatting" on page 94.)