Tascam DR-05 Owner's Manual page 127

3 Prerecording or Auto recording function
status
: appears when the prerecording function is
ON, and in recording standby.
: appears when the auto recording
function is ON, and recording.
4 Low cut filter status
: Low cut filter off
: Low cut filter on (when set to 40Hz, 80Hz,
or 120Hz)
5 Auto tone function status
This icon shows whether the auto tone function
is on or off. (See "Using the AUTO TONE
function" on page 55.)
: Auto tone off
: Auto tone on
6 Recorder operation status
ª
Recording standby
π
Recording paused (Recording standby)
º
Recording
2–Names and Functions of Parts
7 Recording level meters
The input signal level is shown.
During overdub recording, the level of the combined
input and playback sounds is shown.
A ¶ mark is given at the -12dB position on the scale
as a guide mark for input level adjustment.
8 File name
The file name that will automatically be given to
recorded files is shown.
9 Recording mode
Recording file format, sampling frequency, and
stereo/mono (ST/MONO) status are shown.
0 Elapsed recording time
The elapsed recording time of the track appears
as hours: minutes: seconds.
q Remaining recording time
The remaining recording time until the selected
max file size is reached appears in hours:
minutes: seconds.
If the remaining recording time on the card
is less than the remaining time until the
selected max file size is reached, the remaining
recording time on the card is displayed.
19
TASCAM DR-05